Support |
Hey loopers, I have just learned that the first 100 or so Repeaters may have shipped with CFC cards that had the Electrix sticker on the wrong side. I think this is how Chris Hutton got confused and thought the card needs to be upside down to work. The cards do not have to be inserted upside down however, being the early adopters of Repeater, loopers on this list will probably get units from this first batch. You might get a card with the sticker on the wrong side. Just follow these instructions and you should be fine. The CFC card is keyed so it should only go in one way and should slide into the slot fairly easily. However, if it is forced, it can be made to go in the wrong way. Some units are easier to do this than others. Essentially the little "lip" on the back of the card (the end that is not inserted) faces the floor when inserting the card (as long as Repeater is not upside down). If you get a card that has the Electrix sticker on the same side as the lip it is on the wrong side. You need to insert the card with that sticker facing the floor. You are also very lucky because you now have a rare collectors item. Respect, Damon Langlois Creative Director Electrix Tel (250) 544-4091 Fax (250) 544-4100 http://www.electrixpro.com