Support
Looper's Delight
|
Support |
|
|
What I said was "the Repeater needs to be upside down for the card to be properly placed" I definitely was not confused ...... Perhaps you could send me a proper card! You are confused to think it is a wonderful flaw ..... I would like to have the proper card for the Repeater ........ You are telling a lot of people that I am a confused person while admitting I was correct! .......... Perhaps you will send me a proper card 14 months from this date. "Damon Langlois (Electrix)" wrote: > Hey loopers, > I have just learned that the first 100 or so Repeaters may have shipped > with CFC cards that had the Electrix sticker on the wrong side. I think >this > is how Chris Hutton got confused and thought the card needs to be upside > down to work. The cards do not have to be inserted upside down however, > being the early adopters of Repeater, loopers on this list will probably >get > units from this first batch. You might get a card with the sticker on the > wrong side. Just follow these instructions and you should be fine. > > The CFC card is keyed so it should only go in one way and should slide >into > the slot fairly easily. However, if it is forced, it can be made to go in > the wrong way. Some units are easier to do this than others. Essentially >the > little "lip" on the back of the card (the end that is not inserted) faces > the floor when inserting the card (as long as Repeater is not upside >down). > If you get a card that has the Electrix sticker on the same side as the >lip > it is on the wrong side. You need to insert the card with that sticker > facing the floor. You are also very lucky because you now have a rare > collectors item. > > Respect, > > Damon Langlois > Creative Director > Electrix > Tel (250) 544-4091 Fax (250) 544-4100 > http://www.electrixpro.com