Support |
Yes- but CC are hogs in some cases-for example: takes two separate pedals just to Reverse both ways where as a PC would only use 1. I read in the Repeater manual last night that some manufacturers add 1 number to PC and that sometimes subtracting/adding 1 from what the manual says can fix the issue- I wonder why they would do that? Cliff ----- Original Message ----- From: "DaViD AuKeR" <DaVAuK@Hevanet.Com> To: <Loopers-Delight@loopers-delight.com> Sent: Tuesday, January 08, 2002 7:30 AM Subject: RE: Behringer/Repeater questions > > 2: My friend brought his Behringer controller over- and the Rptr acted as if it was using the old 1.0 > > OS as far as some program changes are concerned- worked fine using CC but I re-installed OS 1.1 to > > make sure and same problem- any ideas? > ... > > There seems to be a number of typos in the new manual... > > I found a lot of # errors in the PC column, but have been doing fine > w/CC. > > I recently got the Behringer FCB1010 controller, and am having a great > time with it. It's my first experience w/midiboard. The thing hummed a > bit at first, but I think it was just nervous about my programming > skills...it's much better now! I'm including how I programmed a couple > banks...much of this info was kindly given me by Alan, which helped .A > LOT. (thanks, Alan)! If any of you have additional suggestions > (including any trick "two at one time" switches), it would be dug! > > bank 00: > > 01 record (cc86 value=127) > 02 undo (cc89 value=127) > 03 erase loop (cc108 value=123) > 04 play (cc85 value=127) > 05 stop (cc87 value=127) > 06 track select 1/2 (cc90 value=127) > 07 track select 3/4 (cc91 value=127) > 08 loop select down (cc97 value=127) > 09 loop select up (cc96 value=127) > 10 multiply loop (cc102 value=127) > On each preset I have the expression pedals configured as follows: > ExpA track level 1/2 (cc110 values=0-127) > ExpB track level 3/4 (cc111 values=0-127) > ================================= > Bank 01: > > 01 record (cc86 value=127) > 02 undo (cc89 value=127) > 03 play (cc85 value=127) > 04 stop (cc87 value=127) > 05 fx insert (cc103 value=16 (fx on imput) (R ex ped fx not active? (cc > 103 value 0-1)) > 06 track select 1 (cc80 value=127) > 07 track select 2 (cc81 value=127) > 08 track select3 (cc82 value=127) > 09 track select4 (cc83 value=127) > 10 reverse loop (cc84 value=127) (R ex ped cc 84 value 0-1) > > Bank 02: > 01 Feedback (cc11 (R ex ped cc 84 value 0-127) > ... > > Until Electrix implements a midi pedal initiated fade function, > > or visual cues as to where the "feedback" level is when controlled via midi, > > I'm perfectly happy with the 3 button footswitch and hands on weakage. - > > That would be nice. Still, with the expression pedal, one can get > fairly close to desired % feedback with practice (and sensitive > Looper'sock) It would be also great to Erase select tracks, and not > just the whole loop (but whole loop erase is better than nothing!). > > David >