Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Repeater start/stop messages



would this apply?

(from the most recent repeater manual):

Advanced MIDI RT tweaking
In some situations it may be desirable for Repeater to NOT send
out MIDI RT start, stop and SPP messages. The output of these
messages can be inhibited/enabled by sending Repeater the
Inhibit MIDI RT Control CC message.

The Inhibit MIDI RT Control CC message is:

CC:    112
value:  0-63 (off) 64-127 (on)

mike

----- Original Message -----
From: "Clifford Novey" <om@om-studios.com>
To: <Loopers-Delight@loopers-delight.com>
Sent: Monday, April 15, 2002 1:37 PM
Subject: Re: Repeater start/stop messages


> No because the start/stop messages are just like midi clock-
it doese,nt
> matter what chanel you are on because the info is broadcast on
all channels
> regardless of selection.
>
> c
>
> ----- Original Message -----
> From: "jim palmer" <jimp@pobox.com>
> To: <Loopers-Delight@loopers-delight.com>
> Sent: Monday, April 15, 2002 7:34 AM
> Subject: Re: Repeater start/stop messages
>
>
> > i may be misunderstanding your problem, but can't you solve
> > this by setting his repeater to a different channel than
your repeater?
> >
> > >... the issue is that I am using everything on
> > > a Thru chain and his Repeater start/stop is being
controlled by mine
> > > which we do NOT want- and I do not want to use the midi
Out of any of
> > > the other devices either. We just need the clock to lock
to- the
> > > start/stop messages are part of the clock stream which
does not pay
> > > attention to midi channel- How can we filter this data out
without using
> > > a computer? I looked at the MidiSoloutions mapper and
installed the
> > > software for it but it only maps/converts messages other
than real-time
> > > clock etc. Any info appreciated.
> > >
> > > Cliff
> >
> >
> >
> >
> >
> >
>
>