Support
Looper's Delight
|
Support |
|
|
I don't know the capabilities of the Repeater, but
with my stuff I can do a lot of similar functions.
For example, I can do loop record/overdub with a
single pedal, along with stop/start, forward/reverse,
regular/half speed and tap tempo on my Echo Pro using
the FCB1010.
I use CC messages to do this. With firmware revision
2.2 and up the FCB1010 can cycle through two different
values for a CC number. So, and I can't remember the
CC number off hand, but say for loop/overdub it uses
CC# 34 with a value of 00-64 for overdub and a value
of 65-128 for loop. The first press starts loop
recording and the second press will start overdubbing
out of loop recording. I have the same pedal in all
banks of my FCB1010 set up to do this and it works
fine.
Isn't it possible to set up the Repeater to have all
tracks' volume respond to the same expression pedal?
It seems to me that it would be no different than
assigning effects parameters to an expression pedal,
which the FCB1010 has no problems doing. If it can't
then that's a pretty severe limitation of a
fundamental sort for the Repeater.
Anyway, here's how to set up a tap tempo:
http://www.altrion.org/fcb1010/taptempo.html
Here's how to utilize cycling CC values:
http://www.altrion.org/fcb1010/extra.html
Good luck!
--- Dan Soltzberg <d.ans@verizon.net> wrote:
> hello all--
>
> I've been hibernating with a final mix of a
> full-length solo bass CD (played
> live and looped with EDP and DL4) -- it's in the
> final tweaking stages--
> thus, haven't been on the list much lately. Hope all
> is good with everyone.
>
> I also finally got around to dealing with my FCB/
> Repeater combination, and
> have come up stumped in a couple of areas. I've
> checked the archives of this
> list, the FCB list, and the Repeater list, and not
> been able to find what I
> need. Any help would be much appreciated.
>
> Can anyone send specific parameters to program the
> FCB to:
>
>
> Have one expression pedal change the volume level of
> all 4 tracks
> simultaneously (probably impossible, but if there's
> a way, that would be
> awesome)
>
>
> Overdub and stop overdub with a footpress
>
>
> Program the same footswitch to play and to stop a
> loop (tried Weg's
> parameters, but it didn't work)
>
>
> Tap tempo
>
>
> A lot of these issues seem to have to do with
> whether the footswitch works
> as a toggle or not-- is there a way to control this
> in the global
> parameters?
>
>
>
> Thanks much for your help,
>
>
> dan
>
>
> --
> ghost 7/ Oranje
> http://envelopeproductions.com
> d.ans@verizon.net
>
>
>
>
>
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com