Support
Looper's Delight
|
Support |
|
|
I'm finding that a little hard to believe. I haven't used a Ground Control but, while shopping for a MIDI controller, I went through the manuals for just about everything including the latest Ground Control Pro. It looks to me like you can get any foot controller to work with the EDP as long as you can figure out how to program it (and as long as the unit will let you program it). The only unit I saw where this wouldn't be possible was the Boss FC-50. I use an All Access and a Roland FC-200 and both work with the EDP quite nicely. For good timing on recording loops though, I like the softer buttons (FC-200, FCB1010, etc) over the harder click buttons (All Access, Ground Control Pro). As far as the original question goes ... there is a TON more MIDI support in Loop IV than there was in Loop III. Glenn > -----Original Message----- > From: L. Angulo [mailto:labalou2000@yahoo.com] > > Hi Aasmund, > As far as i know the Ground Control doesn´t work with > the EDP i had one as well and got rid of it > get a Behringer fcb1010 and you will be a lot luckier! > Louie > > --- Øyvind_Ruud <oeru@online.no> wrote: > > Hi, I'm Aasmund Ruud from Norway. This is my first > > post here at Looper's Delight. > > I'm about to purchase an Echoplex; meanwhile I'm > > borrowing one from a friend of mine. It has Loop III > > ver.5 in it. > > I've seen on this site a Midi implementation spread > > sheet for the Loop IV, and I wonder if the newest > > software differ from the old one in that respect? > > I use a Ground Control which sends CC's to the > > Echoplex that's set to source 36; > > when I use the mentioned spread sheet as a reference > > to assign the Reverse command, I get nothing. > > Any help would be appreciated