Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Ground control and EDP

Sure you can use the GC to send simple program changes
and CCs, but the EDP requires (as far as i know) a
controller that will send Note ons even to program the
basic functions 
The fcb 1010  works great with the EDP plus you have 2
exp pedals,all of this for a lot less money!
cheers
Louie
--- Glenn Poorman <glenn.poorman@autodesk.com> wrote:
> I'm finding that a little hard to believe. I haven't
> used
> a Ground Control but, while shopping for a MIDI
> controller,
> I went through the manuals for just about everything
> including
> the latest Ground Control Pro. It looks to me like
> you can
> get any foot controller to work with the EDP as long
> as you
> can figure out how to program it (and as long as the
> unit
> will let you program it). The only unit I saw where
> this
> wouldn't be possible was the Boss FC-50. I use an
> All Access
> and a Roland FC-200 and both work with the EDP quite
> nicely.
> 
> For good timing on recording loops though, I like
> the softer
> buttons (FC-200, FCB1010, etc) over the harder click
> buttons
> (All Access, Ground Control Pro).
> 
> As far as the original question goes ... there is a
> TON more
> MIDI support in Loop IV than there was in Loop III.
> 
> Glenn
> 
> > -----Original Message-----
> > From: L. Angulo [mailto:labalou2000@yahoo.com] 
> > 
> > Hi Aasmund,
> > As far as i know the Ground Control doesn´t work
> with
> > the EDP i had one as well and got rid of it
> > get a Behringer fcb1010 and you will be a lot
> luckier!
> > Louie
> > 
> > --- Øyvind_Ruud <oeru@online.no> wrote:
> > > Hi, I'm Aasmund Ruud from Norway. This is my
> first
> > > post here at Looper's Delight.
> > > I'm about to purchase an Echoplex; meanwhile I'm
> > > borrowing one from a friend of mine. It has Loop
> III
> > > ver.5 in it.
> > > I've seen on this site a Midi implementation
> spread
> > > sheet for the Loop IV, and I wonder if the
> newest
> > > software differ from the old one in that
> respect?
> > > I use a Ground Control which sends CC's to the
> > > Echoplex that's set to source 36;
> > > when I use the mentioned spread sheet as a
> reference
> > > to assign the Reverse command, I get nothing. 
> > > Any help would be appreciated
> 


=====
www.luis-angulo.com

__________________________________
Do you Yahoo!?
Find out what made the Top Yahoo! Searches of 2003
http://search.yahoo.com/top2003