Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: does the edp pass mechanical control when sync'd in a stereo pair?

At 08:12 AM 1/31/2004, JAMES FOWLER, III wrote:
>...like, if i connect a volume pedal to the back of
>the unit, it won't pass this information to it's
>stereo partner like it will with midi, correct?

Feedback is passed. So if you are using the pedal to control feedback, you 
only have to connect it to the master. The master then uses midi to send 
feedback control to the slave.

If you are using one of the interface modes where the pedal controls loop 
input or output volume, this is not passed to the slave. (because these 
controls happen in analog). One way to work around this is use a stereo 
volume pedal connected to both units.

kim


______________________________________________________________________
Kim Flint                     | Looper's Delight
kflint@loopers-delight.com    | http://www.loopers-delight.com