Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

RE: All Access/Ernie Ball Pedal(s) Question



Thanks

I searched the archives and saw both of your names in
the threads, so I guess you've been through this a
bit. Please bear with me.

So it seems the 6166 Mono is a better choice cause the
pots can be replaced without soldering? An insert
cable is a stereo cable no? 

No word from Hans yet, although he states in the
archive that the 6167 is a linear taper, and that
certainly isn't true in mine, all the action is in the
top 3rd of the pedal.

tim
--- Jim Palmer <jimp@pobox.com> wrote:
> where hans lindauer?
> he has all kinds of good info on this topic.
> 
> the physical size of the pot depends on whether you
> have
> the old style pedal or the new ones.
> old = english = 1/4 inch shaft.
> new = metric = i can't remember, i had the 1/4
> incher.
> 
> anyway, the allaccess uses the pot as a voltage
> divider, so any value will be ok. there will be
> some lower limit, but 100k will work, though
> 10k is more common in the quality pots).
> i'm thinking hans recommended a conductive plastic
> pot.
> he gave out some model numbers a while back, 
> check the archives ('ernie ball;pot;hans')
> 
> you can also wire the pedal to use a single trs jack
> to make
> the cabling simpler (otherwise you use an insert
> cable)
> 
> hope this helps, it's been a while since i've had
> anything to say here...
> 
> 
> > 
> > I thought as much. So the mono pedal will work?
> What
> > kind of cable, I though it had to be stereo?
> > 
> > The 6166 is a 250k ohm. How tough is it to replace
> the
> > pots?
> > 
> > tim
> > --- "JAMES FOWLER, III" <jimfowler@prodigy.net>
> wrote:
> > > 
> > > eb will NOT mod your pedal.  don't bother
> asking.
> > > 
> > > you'll need to replace the audio pot with a 100k
> > > linear pot if you're using an all access.  i've
> got
> > > two eb 6166's with my aa and it works great.
> > > 
> > > actually...lemme check, i may be telling you the
> > > wrong resistor value.
> > > 
> > > -jim
> > > 
> 

__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com