Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

AW: The Big(ish) Idea

Title: Nachricht
I have been doing this kind of thing using a multi-FX (think FireworX) plus a footswitch (also, the Roland V-xxxx series works if you connect a volume control in the signal chain to e.g. your CTRL pedal).
Adrian, why going active? Is there any reason to this?
Phil, another suggestion: Switch two could be the momentary foot switch that you describe. Switch one could operate Switch two's polarity switch and change it from normally off to normally on. (Of course switch two would be latching). So you could use the pedal to let signal pass when you press switch two ("gate mode") or to interrupt the signal when you press switch two ("slice mode"). If you put the device in slice mode and leave switch two alone, the thing is basically off.
-----Ursprüngliche Nachricht-----
Von: Adrian Bartholomew [mailto:adrian@bartholomusic.com]
Gesendet: Montag, 19. September 2005 19:12
An: Loopers-Delight@loopers-delight.com
Betreff: Re: The Big(ish) Idea

nice idea! it would be fun to loop that.
i can build it for u. just let me know how big u want the box. how u want the buttons aligned and what type/size of buttons u want to use. i assume u want the standard... in on the right out on the left?

now im not trying to put u down in anyway. u have a great creative mind. hats off to u for pursuing this. its a good idea but im afraid, not all that unique and involved to be awarded a patent. and it could be done in a million and one ways too, so anyone could run around ur patent anyway. see what im saying?
meanwhile, back on the ranch. what do u envision paying for this to be built? the parts wont be that expensive at all and my labor cost would reasonable. we could always figure something out.

the most expensive thing would be the box itself. i would do it with active electronics. ie with logic and analog chips that need power. simple 9V adaptor that could chain to ur existing pedals. also ill have true bypass to eliminate any clicking on and off.
i already have the schematic in my head and the parts i need. i already have the components i need in my lab too. lucky u!
i would just need to order the box and the switches of ur choice. radio shack most likely has the casing u need but i know they dont have any heavy duty foot switches. i need the double pole type to keep it true bypass and momentary for the 2nd switch. it should not click like the 1st on/off switch. just be spring loaded push on/release off. soft feel.

if all this sounds like gibberish, im sorry. i get carried away.
but not to worry. once we have all the parts we need, it would only take a week (i have a busy schedule)and u could have it in ur hands a few days after that. u would be responsible for painting and printing any logo u want though:-)

text back privately.

Adrian Bartholomew
Leawood KS
On Sep 19, 2005, at 11:35 AM, phill wilson wrote:

Hi All

Ok, so I have been hinting at building a pedal for a while now, for reasons that I won't go into, my Ego kind of wanted to keep the design some sort of secret,however this has led to nowhere for me so it is time to REVEAL ALL!!!

Basically I want to make a foot operated device that allows a signal to pass only when the button is pressed. Kind of a Poor-Mans-Morse-Glitch Pedal.

I envisaged building it as follows.

two buttons button one simply being on / off
In off position the signal is bypassed directly to the output jack
in the On position it passes to the next momentary button.

Button Two is the activation button,

it is a push to make type switch so initially the signal is dead, however, when the button is pressed the sound is allowed to pass to the output.

I can therefore strum a chord while it is off then tap the button rythmically to let small stabs of sound through.

I came up with this when playing through a broken amp that you had to hold the jack in place in the input, i found that tapping the jack let me do dda-da-da type noises.

anyways basically I know NOTHING about how to do this, I did what seemed reasonable to me but all I got was nasty hiss and buzzing. I would appreciate ANY help or comments on how I may impliment this pedal.

I had once dreamed about making money off this idea, however, it will never be built if I cant get some advice!

By the way I intend to LOOP with it so its not totally OT!!

Thanks Y'all

Phill Wilson (a.k.a. Blackface)

Free Downloads at


The new MSN Search Toolbar now includes Desktop search! http://toolbar.msn.co.uk/