Support
Looper's Delight
|
Support |
|
|
Hi Kim, Here is how i have the devices hooked up: (this might not relate to auto record) MPC1000 sampler midi out into FCB1010 midi in then its midi out into EDP midi in.The FCB1010 controller shows a blinking dot when receiving midi clock from the MPC1000 i assume and the EDP was responding as well.I was doing a lot of multiplying,inserting,replacing and re-recording and it would stay synced for the most part but after a while it would start drifting.I am still wondering about this because i tried this at home again and let a loop run for a long time and didnīt notice any problems... cheers Luis --- Kim Flint <kflint@loopers-delight.com> wrote: > At 01:48 AM 12/2/2005, Luis Angulo wrote: > >Yes,there is indeed a problem with it, i did a show > on > >Saturday where we improvised spontaneously music to > >pictures and paintings which were being manipulated > >with software.This is the first time i slave the > EDP > >to my MPC1000 and i had to constantly trigger the > >reAlign function to keep the loops synced,i didnīt > do > >any loop copy or auto record,just simply recorded > to > >the running grooves of the MPC and it still > >happened.As a master the EDP works flawlesly > though. > > Luis, > > The problem we are talking about here only relates > to using AutoRecord with > sync=in, and has the easy fix of using LoopCopy=time > instead of AutoRecord. > If you were not using AutoRecord, then I don't think > you were having the > same issue Per is talking about. There isn't any > known issue with normal > use of sync in from midi clock - that should work > fine. You would have to > give a better explanation of your problem/setup for > us to help you. > > kim > > > ______________________________________________________________________ > Kim Flint | Looper's Delight > kflint@loopers-delight.com | > http://www.loopers-delight.com > > www.luis-angulo.com __________________________________________ Yahoo! DSL Something to write home about. Just $16.99/mo. or less. dsl.yahoo.com