Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Help needed w/echoplex ARRAY



At 08:36 07/01/2007, you wrote:
>At 02:06 AM 1/5/2007, a k butler wrote:
>>I hadn't realised that the edp could also send a pulse for beatsyncing,
>>...anyone got the details for that?
>
>When Sync=Out, the Echoplex sends out pulses through the BeatSync 
>jack at the beginning of each loop cycle.
>
>When Sync=In, the Echoplex receives pulses through BeatSync and 
>syncs itself to them. The pulse can be from any sort of source, a 
>mic next to a drum, a metronome, a momentary switch, another 
>echoplex, the pulse sync outputs of various pre-midi gear, any kind 
>of line level audio pulse, etc.
>
>You can also trigger loops with BeatSync, that's fun too.


so do I have this right?


In normal use the edp is just syncing itself when it gets a pulse 
near enough to the loop Start/End
..but when you hit Mute>>Multiply it retriggers on every pulse (and 
only plays once)

Does that work with the DirectMidi LFRetrigger too?


Worth mentioning that this functionality is available from the 
standard footpedal (or Midi Equivalent)
Mute>>Multiply
then Insert plays loop once from the start for Stuttering etc.
..and hit Undo during playback to go to continuous looping again.





>Normally you would use BrotherSync to synchronize Echoplexes since 
>it is nicely bidirectional, but you could use BeatSync if that wasn't an 
>issue.
>
>It's in the manual, page 6-3:
>http://www.gibson.com/files/amps/EchoplexPlusManual12.pdf
>
>kim