Looper's Delight Archive Top (Search)
Date Index
Thread Index
Author Index
Looper's Delight Home
Mailing List Info
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: EDP FCB1010 beyond the basics

Jason, three things.

1.  Luis Angelo's description is perfect... follow that.  I think what you were missing was the offset instructions.

 
2.  I use a software program to program my FCB, (even though you really only need to do it once, probably) in fact, it allows you to test button depressions straight from your computer.  Of course, it's a mac program.  not sure what computer you're using, but there are editors on the windows side as well.     iFCB

it's absolutely worth the VERY reasonable fee of 14.95

3.  Also remember that the continuous controllers arrangement is similar to what Luis mentioned.  You have to set the feedback and volume controller number on the EDP, and then for EACH BUTTON of FCB1010 you have to assign the continuous controllers.  I use 7 for volume and 13 for feedback, but it doesn't matter AT all what numbers you pick (other than I'm anal and always use controller 7 for volume as it's the midi standard).

I hope that's helpful as well as Luis's post, and just keep asking your questions, we'll back you up.

best, 

todd




 



On 12/21/07, JASON CASKENTTE < jcaskenette@rogers.com> wrote:
I bought a FCB1010 so that I could access the amazing potential of the EDP
 
BUT
 
I can only make my FCB 1010 control the regular 7 functions of the EDP pedal (thanks to the Configuration walk through from some one on the list I just forget who)
 
These midid note numbers arent even in the manual but they work, WHY?
38 RecordButton
39 OverdubButton
40 MultiplyButton
41 Insert Button
42 Mute Button
43 Undo Button
44 Next Button
 
 
 
 but I just cant go beyond those functions in my programing, I've read both manuals and just cant get it.
 
I want to have reverse and replace and half speed multiply next loop, Id like to trigger loops as well and a bunch others functions if I could.
 
 I see the list I see the numbers in the chart but when I input them into the FCb1010 it will not work!
 
why
 
what am I missing
 
HELP!!!!



--
http://www.toddreynolds.com                    |:
http://myspace.com/toddreynoldsmusic  |:
------------------------------------------------------|:
917.576.6166                                              
todd@toddreynolds.com
toddreyn@gmail.com