Support
Looper's Delight
|
Support |
|
|
Okay, the only way I can get this to work is:
If I set the EDP to Timing-->Sync = In
8th/Cycle = 8
Quantize = CYC
Midi --> ControlSource = OFF (If
I do not do this, keyboard presses on the Ozonic intended to be
musical mess with the loop timing in weird ways, display flashes odd
things.)
Then I set Live (haven't gotten Logic to work yet) Midi Sync
preferences / Midi Ports to Sync for Ozonic External (the exchoplex)
but I turn both Track and Remote off in that same row (for good
measure). I also make sure Ozonic External is not set up as a control
surface in the section above.
This allows me to press play in Live so I see it's sending out a midi
sync signal, then start a part or two in Stylus RMX, then I can record
a fairly tight loop of what's playing into the exchoplex, then stop
the RMX plugin so it doesn't echo.
After that I can proceed with looping as normal, changing tracks and
sounds in Live and overdubbing.
PROBLEMS / QUESTIONS:
1. Though there is some quantization going on to keep things in sync,
I don't think it's always starting at the beginning of the phrase and
I'm not sure how to set that... I tried 8th/chcle=8 and the 1/8 note
option in the Live pull down menu, as well as the 1 Bar option. I'm
guessing that's, like, an 8th note in 120 bpm that I'm seeing as a the
single steady flash of Midi Sync out in Live... (took me a while to
realize you have to hit play in live, not just have the plug in
sounding)... are there other options besides this one constant signal
tied to a fixed BPM that might suit working with the EDP?
2. It's interesting that it records a small bit of empty time when
pressing play in Live but not the record button on the echoplex...
seems to fill in the smallest quantized block of time??? Could this be
related to the start point of the loop not being where I anticipate it
should have been?
3. Sometimes if I try to overdub a new drum part it will sound in sync
with what's already been recorded, but not nearly always. It's way hit
or miss even if I haven't stopped the EDP or Live and I can't figure
out why that might be, though I bet if I focus systematically I'll
figure it out... point is though, I'd like to know how to lock it so I
don't have to have some weird work flow to keep it working in true
sync. It's not perfect by any means... echo effect over time,
sometimes start a new RMX drum part and it's just off with what you
recorded of the first two, etc. But sometimes it works well enough...
weird.
5. I played with Sync = OUT on the EDP and In in Live... I forget what
happened now, but a) does anybody think that's worth playing with
more? Would there be some advantage I'm not thinking of? I figure if
the EDP is in sink with the Live, then arpeggiations and delays
applied should be in sync too, but that's the kind of thing I'm asking
about. B) is there a way to get the best of both worlds... some sort
of in AND out method/settings I might consider? So I could, say, start
with a looped sound on the EDP and have that set the BPM in Live or
some such?
6. The EDP has a Sync = OU5 option that is not in the manual. What is
that used for?
MUCH MUCH MUCH MUCH MUCH THANKS FOR ANY THOUGHT, SUGGESTIONS,
TROUBLESHOOTING QUESTIONS, ETC.
Happy looping.
On Sep 27, 2008, at 2:26 PM, David Hayes wrote:
>
> Thank you... firstly glad to know it works... wasted time on it 10
> years ago, didn't want to repeat.
>
> Do you know how to set it up? EDP timing synch=IN (that from memory,
> it's not in front of me) Anything else for the EDP? How do I set up
> Logic or Live to send the signal out... I kind of already did try
> this and nothing happens, so obviously I'm missing something(s).
>
> Much thanks!
>
>
>
>
> On Sep 27, 2008, at 12:50 PM, Claude Voit wrote:
>
>> yes it syncs well if the daw spits out decent tight midiclock
>> why dont you try nobody has your own exact setup and way of looping
>> anyway
>>
>> Claude
>>
>>
>> David Hayes a écrit :
>>> Perhaps my previous post was too wordy...
>>> Does anyone out there use the EDP synched with their computer/DAW/
>>> drum-software midi clock? Does synch it work well? (Record
>>> functions as expected, stays in synch over time etc?)
>>> The old Oberheim's didn't but I have a new one now. However I
>>> haven't tried this in 8-10 years and years so I have no idea how
>>> to set it up properly---what settings need to be made in Logic or
>>> Ableton Live to use the Specrasonics Stylus RMX plug in for drums
>>> (mainly) and yet have the EDP's record/overdub/nextloop functions
>>> work as I normally expect them to.
>>> Much thanks for any advice on the best way to use Logic (or
>>> Mainstage) or Ableton for the routing, effects and drums for use
>>> with live EDP looping!
>>
>