Re: Confused when trying to ASSIGN BASIC EDP FUNCTIONS TO FCB1010

[Timothy Miller <timmylmiller@gmail.com>]

Well, I already e-mailed Mark for one on one help, but basically this is how I'm doing it:

The midi cable is plugged in correctly from MIDI OUT on FCB1010 to MIDI IN on EDP. I have followed the instructions as best as I could. I'll put 2 on the FCB and then 38 on EDP. I press the down button for 2.5 seconds to save it. Nothing happens.

On Fri, Mar 27, 2009 at 4:07 AM, mark francombe <mark@markfrancombe.com> wrote:

Aha.. the Source Offset.. you confuddled me with talk of NOTE OFF. Per...

But good point for you to check Tim... that the offset note number adds up to the one you have chosen in Source Offset on your EDP

On Fri, Mar 27, 2009 at 9:55 AM, Per Boysen <perboysen@gmail.com> wrote:

There is a setting in the EDP where you can off-set MIDI Note numbers
sent from a MIDI pedal into the EDP. This can be used to move the midi
not control range to the absolutely lowest or highest note range if
you want to make room for playing a MIDI instrument on the same MIDI
channel. It can be useful in other ways too, but if you don't know
about it you may be confused why all the midi notes you send to the
EDP is not affecting the commands you have assigned them too.
"Off-set" is not what it is called in the EDP manual, rather what it
does. Maybe it's called "Note Base" or something in EDP-ish...?

Greetings from Sweden

Per Boysen
www.boysen.se
www.perboysen.com

2009/3/27 mark francombe <mark@markfrancombe.com>:

> On Fri, Mar 27, 2009 at 9:39 AM, Per Boysen <perboysen@gmail.com> wrote:
>>
>> note off-set
>
> Whats that Per? My instructions he followed show that he has to use NOTES,
> but is/was there a note OFF setting I forgot...?

--
www.markfrancombe.com
http://vimeo.com/user825094
http://uk.youtube.com/user/markfrancombe
http://www.myspace.com/markfrancombe
http://www.looop.no/shop/catlabel.php?q=Synch%20Non%20Synch