Re: Gibson Echoplex not working

["L.Angulo" <labaloops@yahoo.com>]

Yes Timmothy this happend to me once as well and i solved it  by just 
pressing down the chips and it worked fine
good luck!
Luis


www.myspace.com/luisangulocom


--- On Tue, 4/21/09, andy butler <akbutler@tiscali.co.uk> wrote:

> From: andy butler <akbutler@tiscali.co.uk>
> Subject: Re: Gibson Echoplex not working
> To: Loopers-Delight@loopers-delight.com
> Date: Tuesday, April 21, 2009, 5:34 AM
> 
> 
> Reset is the first thing to try, this is the next.
> 
> Reseat the chips.
> 
> Either you or a tech competent friend should
> open up the edp.
> There are a number of chips in sockets, sometimes the
> connection goes bad and the chip has to be wiggled about in
> the socket,
> or removed and replaced.
> One time it happened to me, and all I did was press
> firmly down on each chip, and it worked ever since.
> 
> andy butler
> 
> 
> Timothy Miller wrote:
> > Not having any luck at the moment. Any other
> suggestions?
> > 
> > On Mon, Apr 20, 2009 at 8:52 PM, Rick Miller <bs@tanawana.com
> <mailto:bs@tanawana.com>>
> wrote:
> > 
> >      From my manual -
> >     “The Parameters can be reset
> to the factory defaults. To do this,
> >     hold  down the Parameter
> Button when you turn on the power to the
> >     Echoplex. Once the start up
> screen displays, you can release it.
> >     When the  Echoplex has
> fully booted up, all of the Parameters will
> >     be reset.“
> > 
> >     Keep your fingers crossed :O)
> > 
> >     rick
> > 
> > 
> >     On 4/20/09 9:27 PM, "Timothy
> Miller" <timmylmiller@gmail.com
> >     <mailto:timmylmiller@gmail.com>>
> wrote:
> > 
> >         My question is
> probably more dumb:
> > 
> >         How do you reset
> it?
> > 
> >         On Mon, Apr 20,
> 2009 at 8:23 PM, Rick Miller <bs@tanawana.com
> >         <mailto:bs@tanawana.com>>
> wrote:
> > 
> > 
> >         
>    Might be a dumb question but did you try
> to reset it maybe??
> > 
> >         
>    Rick
> > 
> > 
> > 
> >             On
> 4/20/09 8:21 PM, "Timothy Miller" <timmylmiller@gmail.com
> >         
>    <mailto:timmylmiller@gmail.com>>
> wrote:
> > 
> >             
>    So this is the situation:
> > 
> >             
>    My echoplex digital pro wasn't giving out
> any sound, so
> >             
>    I went ahead and switched wall outlets as
> well as moved
> >             
>    it to a different location. Now when I
> turn it on, it is
> >             
>    frozen ( most lights are on and won't
> budge or numbers
> >             
>    will show up on screen and won't budge..
> Loop name
> >             
>    doesn't flash through the screen ). I've
> tried different
> >             
>    outlets to fix the problem but nothing
> will work. What
> >             
>    do I do at this point? If nothing is
> resolved, will
> >             
>    Gibson be able to fix it even though they
> stopped making
> >             
>    them?
> > 
> > 
> > 
> > 
> 
>