Support
Looper's Delight
|
Support |
|
|
Cool, Phil! I've seen German singer Michael Shiefer sending SySex into two EDPs with no glitches. http://youtu.be/zzdFnZIpYCA. Nice to hear you got it working now. Greetings from Sweden Per Boysen www.boysen.se www.perboysen.com www.looproom.com internet music hub On Wed, Jul 13, 2011 at 9:05 PM, Phil Clevenger <phil.clevenger@gmail.com> wrote: > Mark, and Per, > > Yes, Program Changes for EDP preset changes are the basis for the > controller setup. But I find there are too many permutations of possible > presets for that to be the complete solution. 5 or 6 basic workflows, > then each wants some quant or 8ths or swichQuant or Insert variation, > too much hunting and pecking. > > So, two more levels I have added to my 5 or 6 basic preset workflows: > > 1) Virtual Parameter button: each patch on my FC 300 includes not only > preset program changes, but a parameter button, so that worst case I can > do with my feet what I used to do with my hands :) > > 2) Control Switches: Depending upon the workflow (glitching, > quantSubstitute, unrounded mult, stutter, etc), there are usually a > couple of salient needs that are related to the context. For instance, > quantSubstitute may want the ability to quickly move between 8th > settings. So I make those available on Control Switches for that > patch... and in that example, the SysEx string is what i needed to get > that, as there is no directMIDI for the 8th values. I have 4 control > switches available currently: I use two for global needs common to > every patch (for me) : Set Start Point and QuantMIDIStartSong, then the > other two are set up on a per-patch basis as described. > > This setup scheme seems to get me to where I want to be with a minimal > amount of tap dancing 90% percent of the time. Hooray ! > > Phil :) > > > > > On Jul 13, 2011, at 3:54:54 AM, Mark Francombe wrote: > >> I Think the way these function are supposed to be controlled using the >> EDP methodology >> is to save them as presets.... But sounds like you're well on the way >> to developing an >> awesome set up. I would love to swap one of my edps for a LP1... And go >> for a system like you!!! > > On Jul 13, 2011, at 4:24 AM, Per Boysen wrote: > >>> On Jul 12, 2011, at 12:00 AM, Phil Clevenger wrote: >>> >>> I am discovering that LoopIV in the EDP does not seem to have a way to >>> directly control 8ths/Cycle, Quantize, or SwitchQuant. >>> How are you folks controlling these params with your MIDI controllers? >> >> >> BAck when I was using an EDP I mocked up a bunch of presets with >> different useful combinations of those settings and then I simply sent >> external MIDI Program Change from my pedalboard to call up the preset >> needed at any moment. >> >> Greetings from Sweden >> >> Per Boysen >> www.boysen.se >> www.perboysen.com >> www.looproom.com internet music hub >> > >