Re: EDP, DirectMIDI, quant, 8ths

[Phil Clevenger <phil.clevenger@gmail.com>]

Thanks Andy !

Yep I noticed an audio drop when making these changes, but it's the audio 
from my guitar that drops, while the ongoing loop remains uninterrupted. 
So I just avoid playing notes while executing Sysex commands. Easier to 
hit the pedals that way anyway ;)

Good tip about the multiple command delay... so far I've been sending 
SysEx only one at a time. WIll be on the lookout as things evolve :)

Best,

Phil :)


On Jul 16, 2011, at 10:11 AM, andy butler wrote:

> hi Phil,
> glad you got the sysex working.
> 
> A couple of hints
> 
> 1) while processing a sysex command the edp doesn't have the processing 
> power
> to do anything else. That includes checking for midi input.
> If you need to change more than one param with a sysex command
> you'll have to use a midi controller that puts a delay between them.
> The audio from the edp will drop out briefly while processing sysex.
> 
> 2) Changes to 8th/Cycle aren't effective till the end of the cycle
> (or is it end of the loop?) 
> andy butler
> (back from holiday)
> 
> 
> Phil Clevenger wrote:
>> Mark, and Per,
>> Yes, Program Changes for EDP preset changes are the basis for the 
>> controller setup. But I find there are too many permutations 
>