Support
Looper's Delight
|
Support |
|
|
LOL yes of course they should... and of course I tested that over and over... In the end I find that they do just that... but only if the "Track Follows CC" parameter in the LP-1 is set to "Yes." D'oh !! Phil (triumphant) On Aug 4, 2011, at 12:48 AM, andy butler wrote: > hi Phil, > > Here's the answer. > > The individual track volumes change the Volume of their respective tracks > *without* selecting the track. > > > > andy > > > > > Phil Clevenger wrote: >> Andy, and LD crew, >> Debugging: >> I have tried the same track-specific commands this evening, MIDI >> hard-wired directly into the LP-1 from an FC300 controller. >> Result is exactly the same: Using any of these - Assign Pedal > Track >> 'n' Volume / Track 'n' Feedback / Track 'n' Pan - fails to select the >> designated track. >> Let's say i am at Track 1, and have set up pedal Controllers #7 and #1 >> to govern Track 8 volume and feedback, respectively. >> Using the Track 8 Volume-assigned pedal will show in the display that >> it is attempting to control Vol, but the track is still Track 1, and >> the numeric readout is static no matter how much I flail on the pedal. >> Just as with the Missing Link, if I invoke the corresponding Select >> Track 'n' command first, then the controls work fine - for that track >> only of course. So I might as well be using the generic Track Volume >> and Track Feedback and Pan commands, with a Select Track to begin with, >> it would be the same thing. If I wanted the extra gesture :) >> So it feels to me like the track-specific Vol/Feedback/Pan commands in >> the LP-1 are just not working as expected. Unless there is some utterly >> stupid user error happening here? >> I am using 1.39... >> Any thoughts? Anyone else see this behavior? >> Phil :) >> On Aug 3, 2011, at 1:20 AM, andy butler wrote: >>> Strange, >>> it certainly works here with a regular midi controller. >>> I've got 24 different CC controllers handling Vol Pan and Fbk >>> for each track. ...and of course, to the LP-1 it makes no difference >>> which route >>> the midi came from. >>> >>> >>> Glad you got it working, might be worth solving the mystery though. >>> >>> It doesn't make any sense that you were able to get the LP-1 to learn >>> the CC values (which would have been >>> displayed on the front panel) and that following that it wouldn't >>> respond. >>> >>> Logically it's either >>> 1) extra commands being sent by your controller >>> 2) LP-1 set up file is corrupt (I doubt it, but if you can save it via >>> pc you could always send it to me for examination) >>> 3) some fault in the connection that just happened to produce the >>> observed result. >>> 4) you're using an old software version on the LP-1...I've not heard >>> of that issue though. >>> >>> andy >>> >>> Phil Clevenger wrote: >>>> Hey Andy, >>>> Yes, that's the perplexing thing... I am in fact using track-specific >>>> calls for each fader, as you suggest... I expected the behavior you >>>> describe, too... but the LP1 will not respond, at least not to >>>> TouchOSC on my iPad over wifi via the Missing Link, unless I >>>> explicitly send a Select Track command first :/ >>>> Phil :) >