Support
Looper's Delight
|
Support |
|
|
|
have you thought of changing between Out to OuS (suspended mode for midi settings) this give clock with no start / stop info?
I still think its the offsets because it sounds excactly like the issue i had..but i may be wrong. > Date: Mon, 5 Sep 2011 10:20:35 +0100 > Subject: Re: Midi out from edp. > From: rickygrahammusic@gmail.com > To: Loopers-Delight@loopers-delight.com > > There are set MIDI note commands that the EDP receives to trigger a > particular function. You need to have a look at the manual and match > it up with the notes your sending. > > On Mon, Sep 5, 2011 at 10:17 AM, mark francombe <mark@markfrancombe.com> wrote: > > Ahh, going off track here I think guys.. good point tho Philip... > > > > What Im talking about is nothing to do with offset I think, as I dont have > > to be sending ANYTHING from my foot controller.. when I look at midi > > monitor, Im getting stop commands mixed in with the clock timing pulses, but > > on the OTHER EDP, nothing... just clean midi clock... but I do remember > > something about the timing midi beeps... I havent had a chance to check > > Manual yet, since your hint Ricky, but maybe Philip is right, maybe those > > beeps are affected by offset.. have to check... but its NOT a note off Im > > getting, its a stop song (I think) > > > > M > > > > On Mon, Sep 5, 2011 at 11:10 AM, Ricky Graham <rickygrahammusic@gmail.com> > > wrote: > >> > >> If in doubt, look at the manual :-) They list MIDI note number > >> commands. Perhaps you are sending a command you are unaware of. > >> > >> On Mon, Sep 5, 2011 at 10:02 AM, phillip wilson <phillwilson@hotmail.com> > >> wrote: > >> > ok i know this one...................... > >> > > >> > > >> > what number ofset are you using ??? > >> > > >> > > >> > there are some odd notes that get sent in minus numbers bellow the > >> > 0......... > >> > > >> > try altering the offset numbers for your midi commands by 10 - 20 and > >> > see > >> > what happens. > >> > > >> > > >> > i had this using 3 edps............ 2 would send clock fine and the > >> > third > >> > would just kind of instantly send a start song but also send out a > >> > timing > >> > pulse that kills it so on my electribe it sounded like i got a single > >> > drum > >> > beat. > >> > > >> > > >> > > >> >> Date: Sun, 4 Sep 2011 23:33:57 +0100 > >> >> Subject: Re: Midi out from edp. > >> >> From: rickygrahammusic@gmail.com > >> >> To: Loopers-Delight@loopers-delight.com > >> >> > >> >> I am not sure, but MIDI clock and MIDI note messages are not the same > >> >> thing, so it could be the source of your problem. I haven't used my > >> >> EDP in some time (since using Echoloop in software). Yes, you need > >> >> Andy to clarify ;) Andy? > >> >> > >> >> On Sun, Sep 4, 2011 at 11:24 PM, mark francombe > >> >> <mark@markfrancombe.com> > >> >> wrote: > >> >> > What? Is that possible?, but wait... YES...!!! > >> >> > the edp sends little beeps on the bar and one on the beat doesnt it? > >> >> > Maybe > >> >> > THAT it?? fuckity fuck... How do I disable that.. weirdly my other > >> >> > edp > >> >> > doesnt do that.. > >> >> > Is this just a midi channel thing then? > >> >> > > >> >> > I think you have put me on to something Ricky.. thx... wheres the > >> >> > Butler > >> >> > when you need him...? > >> >> > > >> >> > In the end at our rehersal, we just all set the same exact BPM, and > >> >> > it > >> >> > was > >> >> > pretty ok... A bit Steve Reich at times, but that no bad thing! > >> >> > > >> >> > M > >> >> > > >> >> > > >> >> > On Sun, Sep 4, 2011 at 7:29 PM, Ricky Graham > >> >> > <rickygrahammusic@gmail.com> > >> >> > wrote: > >> >> >> > >> >> >> Sounds to me like you are sending MIDI note on and off messages, not > >> >> >> MIDI > >> >> >> clock. > >> >> >> > >> >> >> On Sun, Sep 4, 2011 at 5:57 PM, mark francombe > >> >> >> <markfrancombe@gmail.com> > >> >> >> wrote: > >> >> >> > > >> >> >> > Weird thing, playing with some guys right now, and they need midi > >> >> >> > clock > >> >> >> > from > >> >> >> > me, they say that thr clock they are getting from me has a kind of > >> >> >> > stop > >> >> >> > In > >> >> >> > it... So their gear is not working... Weirdly this happened to me > >> >> >> > recently > >> >> >> > when this same edp was plugged into the repeater, the repeater > >> >> >> > would > >> >> >> > just > >> >> >> > stop after one note... > >> >> >> > Help > >> >> >> > > >> >> >> > M > >> >> >> > Sent from my (advertisement removed) > >> >> > > >> >> > > >> >> > > >> >> > -- > >> >> > Mark Francombe > >> >> > www.markfrancombe.com > >> >> > www.ordoabkhao.com > >> >> > http://vimeo.com/user825094 > >> >> > http://www.looop.no > >> >> > twitter @markfrancombe > >> >> > > >> >> > >> > > >> > > > > > > > > -- > > Mark Francombe > > www.markfrancombe.com > > www.ordoabkhao.com > > http://vimeo.com/user825094 > > http://www.looop.no > > twitter @markfrancombe > > > |