RE: Midi out from edp.

[phillip wilson <phillwilson@hotmail.com>]

oh and in my instance it was sending this command to external gear even from the front panel so it wasn't foot controller related as such. simply ending record with a incorrectly setup offset yielded this even off the front buttons

---

From: mark@markfrancombe.com
Date: Mon, 5 Sep 2011 11:17:28 +0200
Subject: Re: Midi out from edp.
To: Loopers-Delight@loopers-delight.com

Ahh, going off track here I think guys.. good point tho Philip...

What Im talking about is nothing to do with offset I think, as I dont have to be sending ANYTHING from my foot controller.. when I look at midi monitor, Im getting stop commands mixed in with the clock timing pulses, but on the OTHER EDP, nothing... just clean midi clock... but I do remember something about the timing midi beeps... I havent had a chance to check Manual yet, since your hint Ricky, but maybe Philip is right, maybe those beeps are affected by offset.. have to check... but its NOT a note off Im getting, its a stop song (I think)

M

On Mon, Sep 5, 2011 at 11:10 AM, Ricky Graham <rickygrahammusic@gmail.com> wrote:

If in doubt, look at the manual :-) They list MIDI note number
commands. Perhaps you are sending a command you are unaware of.

On Mon, Sep 5, 2011 at 10:02 AM, phillip wilson <phillwilson@hotmail.com> wrote:
> ok i know this one......................
>
>
> what number ofset are you using ???
>
>
> there are some odd notes that get sent in minus numbers bellow the
> 0.........
>
> try altering the offset numbers for your midi commands by 10 - 20 and see
> what happens.
>
>
> i had this using 3 edps............ 2 would send clock fine and the third
> would  just kind of instantly send a start song but also send out a timing
> pulse that kills it so on my electribe it sounded like i got a single drum
> beat.
>
>
>
>> Date: Sun, 4 Sep 2011 23:33:57 +0100
>> Subject: Re: Midi out from edp.
>> From: rickygrahammusic@gmail.com
>> To: Loopers-Delight@loopers-delight.com
>>
>> I am not sure, but MIDI clock and MIDI note messages are not the same
>> thing, so it could be the source of your problem. I haven't used my
>> EDP in some time (since using Echoloop in software). Yes, you need
>> Andy to clarify ;) Andy?
>>
>> On Sun, Sep 4, 2011 at 11:24 PM, mark francombe <mark@markfrancombe.com>
>> wrote:
>> > What? Is that possible?, but wait... YES...!!!
>> > the edp sends little beeps on the bar and one on the beat doesnt it?
>> > Maybe
>> > THAT it?? fuckity fuck... How do I disable that.. weirdly my other edp
>> > doesnt do that..
>> > Is this just a midi channel thing then?
>> >
>> > I think you have put me on to something Ricky.. thx... wheres the Butler
>> > when you need him...?
>> >
>> > In the end at our rehersal, we just all set the same exact BPM, and it
>> > was
>> > pretty ok... A bit Steve Reich at times, but that no bad thing!
>> >
>> > M
>> >
>> >
>> > On Sun, Sep 4, 2011 at 7:29 PM, Ricky Graham
>> > <rickygrahammusic@gmail.com>
>> > wrote:
>> >>
>> >> Sounds to me like you are sending MIDI note on and off messages, not
>> >> MIDI
>> >> clock.
>> >>
>> >> On Sun, Sep 4, 2011 at 5:57 PM, mark francombe
>> >> <markfrancombe@gmail.com>
>> >> wrote:
>> >> >
>> >> > Weird thing, playing with some guys right now, and they need midi
>> >> > clock
>> >> > from
>> >> > me, they say that thr clock they are getting from me has a kind of
>> >> > stop
>> >> > In
>> >> > it... So their gear is not working... Weirdly this happened to me
>> >> > recently
>> >> > when this same edp was plugged into the repeater, the repeater would
>> >> > just
>> >> > stop after one note...
>> >> > Help
>> >> >
>> >> > M
>> >> > Sent from my (advertisement removed)
>> >
>> >
>> >
>> > --
>> > Mark Francombe
>> > www.markfrancombe.com
>> > www.ordoabkhao.com
>> > http://vimeo.com/user825094
>> > http://www.looop.no
>> > twitter @markfrancombe
>> >
>>
>

--
Mark Francombe
www.markfrancombe.com
www.ordoabkhao.com
http://vimeo.com/user825094
http://www.looop.no
twitter @markfrancombe