Re: How to get Amplitube 3.5 working with FCB1010 (UnO v1.0.2f)?

[Louie Angulo <louie.angulo@googlemail.com>]

Hi Michiel,
Sorry for not getting to you earlier been busy.
i dont know if u have the UnO chip on your Behringer,i do and this is
the way i set it up to turn the stomp boxes on and off in amplitube.
It might be similar with the normal fcb1010,if not check the manual
how you can enable toggel mode.

fist we have to go to "global mode" to configure the fcb1010:

GLOBAL MODE
1. while press the "down" button  turn the fcb1010 on
2.you are now in step 1 on the fcb1010 but we want to go to step 2 so
press the up button once
3. we want to enable the CC buttons to "toggle mode",switch 8 enables
the CNT1 button and button 9 the CNT2 to toggle.
   you only need to enable the CNT1 so to do this press button number
8 until it lights up
4. now we need to get out of global mode so just press the down button.

PRESET MODE
5.now lets say we want to control the delays on and off switch on
amplitube with FCB1010 button number one.
   we need to go into "preset configuration" by pressing the "down"
button for 2 seconds
6. press the up button twice and press button # 6 which is the CNT1
7.give it a CC1 then give it values 00 and 127
8.get out of preset mode by pushing button down for 2 seconds.
now try it see if it works!
let me know
cheers
Luis


cheers
Luis


On Tue, Sep 20, 2011 at 6:14 PM, Michiel de Jong <m.dejong02@chello.nl> 
wrote:
> Hi Louie,
> I just stumbled on a thread you started related to Amplitube 3 &  The
> FCB1010. Hope you don’t mind I ask you some questions, but I just got me 
> a
> FCB1010 and aren’t able to get it working with Amplitube 3. Could you 
> give
> me some pointers what should do and try?
> I already read some threads around this topic, watched the youtube videos
> made by JasTheMusicman, and downloaded a program called FCB1010 Midi 
> Editor
> (v2.99-2), but still I haven't been able to get things working.

> My setup is like followed:
>
> Windows XP (SP2), Amplitube 3.5.2, FCB1010 Midi Editor, Behringer FCB1010
> and EMU X Midi 1x1 Tab USB-MIDI Interface.

> When I press the knobs on the FCB1010 Floorboard the "Midi In" box left
> under in the corner of Amplitube lights up. So there is Midi comming in. 
> But
> that's about it. Also have been fooling around with the Midi learn 
> section.
> But no matter what I do after I activate learn in Amplitube it keeps 
> waiting
> for Midi input.
>
>
>
> Best regards,
>
> Michiel



-- 
www.luis-angulo.com