[
Date Prev][
Date Next] [
Thread Prev][
Thread Next]
[
Date Index][
Thread Index][
Author Index]
Re: More EDP synch woes!
I would never call you that Andy!
I will check that, (incidentaly, do I have setting correct for midi IN sync.. If EDP1 is Brothered to EDP2 and the midi clock is going to EDP1, then do I have EDP1 set to IN and EDP2 to OUT? or both IN?)
but during SYNC = IN, What is the the display showing actually, when in reset?
Is it the length of a loop at the currently set tempo that its receiveing? because isnt that the same whatever the 8th setting?
If Im sending EDP 120bpm. then I can't get my first loop (cycle) to be anything less than one measure right?
In fact I was gonna mention this to those developing Ecoloop (Grob etc) that a very cool option would be to be able to divide the incoming tempo info from a clock to some division. I for one usually run my EDP very fast, routinely having 32 cycles in a bar (I guess in a LaFosse stylee) even if it doesnt sound like it, This is difficult when receiving clock from another person. I cant exactly ask them to send twice the tempo, when they have done all this preparatory work in Abelton for example...
Mark
On Mon, Oct 24, 2011 at 12:08 PM, andy butler
<akbutler@tiscali.co.uk> wrote:
mark francombe wrote:
And VERY WEIRD.. I get different numbers on both EDP's... They are both set the same, sync=IN.. but consistantly, one is showing 0.70 and the other is 05.5 So different!!!
WHY!!!?????
I change the tempo up to 160 (my theory being that slower clock is wobblier.. ) and the same occurs. EDP 1 is =.38 and EDP 2 is 03.1
WHY WHY WHY???
that this turns out to be right ;-)
EDP 1 has
8th/Cycle = 1
EDP 2
8th/cycle = 8
andy
--
Mark Francombe
www.markfrancombe.com
www.ordoabkhao.com
http://vimeo.com/user825094
http://www.looop.no
twitter @markfrancombe
http://www.flickr.com/photos/24478662@N00/
