Re: Old LP1 upgrade problem

[tedkillian <tedkillian@charter.net>]

Mr. Anthony Wiench,

There is no one to take you off of this list (once you’ve subscribed) 
except yourself.

Yes, it’s true, no one can take you off the list but you.

The original owner/operator (Kim Flint) died years ago and there is nobody 
at home but us LD chickens (the remaining members of the list).

That said . . . there is a mechanic that you can initiate to get yourself 
off the list.

Follow these instructions.

To unsubscribe, send an mail with the word “unsubscribe" in both the 
subject and body, and no signature files or anything else, to:

        <Loopers-Delight-request@loopers-delight.com>

If per chance you are on the digest version of Looper’s Delight, send your 
unsubscribe request to:

        <Loopers-Delight-d-request@loopers-delight.com>

Good bye and good luck.

You have to do this yourself. 

No one here can do it for you.

> On Sep 1, 2018, at 8:17 AM, Anthony Wiench <ajwiench@gmail.com> wrote:
> 
> Please take me off your email list
> 
> Thank You
> 
> Anthony “AJ” Wiench
> Broker – Owner
> Cell: 925-570-9800
> www.OnePointRealty.net
> CA BRE# 01145903
> 
> Sent from my iPhone
> 
> 
> 
>> 
> 
> On Sep 1, 2018, at 9:08 AM, formantuk <formantuk@yahoo.co.uk> wrote:
> 
>> Hi Dennis,
>> 
>> first thing would be to establish what IP your router is on this is 
>> normally 192.168.1.1 but this may not always be the case.
>> 
>> for example if the router is 192.168.1.1 the LP1 should look like this:
>> 
>> IP:  192.168.1.5
>> Gate:  192.168.1.1
>> Netmask: 255.255.255.0
>> 
>> I used to use IP: 192.168.1.5 (I chose .5 as the laptop would normally 
>> take .2 desktop .3 etc.
>> 
>> If using the crossover adapter you have to connect the LP1 directly to 
>> the laptop not via the router.
>> 
>> I used to manually set a fixed the IP for a windows machine like this:
>> https://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/
>> Then set the gateway to whatever IP you fixed the laptop to.
>> 
>> example:
>> 
>> IP:  192.168.1.5   LP1
>> Gate:  192.168.1.2 laptop
>> Netmask: 255.255.255.0
>> 
>> one further tip - clear you browsers cache
>> 
>> Regards
>> 
>> Rob
>> 
>> 
>> 
>> 
>> On 01/09/2018 00:52, Dennis M wrote:
>>> Hi all,
>>> 
>>> I've been trying to connect my 2006 LP1 through ethernet directly to 
>>> my laptop to upgrade the OS via a browser...unfortunately I can't get 
>>> the connection to work. Here's what I'm doing:
>>> 
>>> 1) Set LP1 as follows from my 1.20 manual:
>>> 
>>> IP:  192.168.99.2
>>> Gate:  192.168.99.1
>>> Netmask: 255.255.255.0
>>> 
>>> 2) Set laptop ethernet:properties:Internet Protocol Version 4 to the 
>>> exact same settings as the LP1.
>>> 3) Open browser and try to connect with: http://192.168.99.2 but it 
>>> eventually times out.
>>> 4) I've tried with both a regular ethernet cable and a crossover 
>>> cable...no connection.
>>> 5) I've also tried letting the laptop dynamically determine the IP, 
>>> Gate, Netmask...no connection.
>>> 
>>> I'm going nuts trying to get this simple connection to work with no 
>>> success.  Am I missing something obvious???
>>> 
>>> Thanks!
>>> Dennis