[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Date Index][Thread Index][Author Index]

Re: Using the standard EDP pedal with 2 EDPs

mark francombe wrote:

    This depends on the ControlSource param.

Damn!! I thought that parameter stood for ControlChange messages and Note messages, that you could use both via midi!!

Well yes, you're right,
it affects the response to incoming midi (Note or Ctr)
and also the midi which is output when the button is triggered
(either by midi, or front panel or footswitch

you mean... It depends on whether the control signal is passed on to the second unit?

so they can only talk to each other if EDP generates the midi type
that EDP2 is listening for.

Well usually yes... but I like the idea that I have a pedal that operates both simultaneously, Im imagining recording 2 things seperately (using front panel, or iPad) with 2 different lengths, then doing Quantised Sub into that, with the pedal, will record that chunk to both, but presumably will go out of synch by an 8th every time... nice... If Im not mistaken?

iirc the response of EDP2 can be a bit unpredictable in this context.

May not do the 8th Quant thing properly.

I didn't track down exactly why yet.....however once it starts working
it's possible to have a polyrhythmic sync and do 8th rep on it.

What I like to do is to have Quant = Cycle, Insert=SUS
Record a short one beat loop with the EDPs in stereo setup.

Then each "insert" adds a beat.
..and hitting Insert on the edp2 front panel just once  makes things 

I am assured there will be a long soundcheck... thank the lord for that! If there is one...

good luck