Support
Looper's Delight
|
Support |
|
|
It would be worthwhile trying the merge box as the 1010's Through is know to be iffy. There's an alternate operating system that you can read about & order through the FCB1010 Yahoo group that is supposed to improve the Through and many other elements. Cheers, Scott M2 http://www.dreamSTATE.to ambientelectronicsoundscapes http://www.THEAMBiENTPiNG.com > Luis > > are you really sure of the quality off the soft thru off the behringer > footped ?? before going after the edp again ... > it took me 20 sec to make a search on the fcb yahoo group (soft thru) to > find some post complaining about the merge function > > and you go with midi clock thru the fcb while banging whatever edp > functions > and complaining the edp looses sync "sometimes" after a while. > quote > I was doing a lot of multiplying,inserting,replacing and > re-recording and it would stay synced for the most > part but after a while it would start drifting > unquote > > please get a "real" merge box then describe exactly what you pressed then > we > can perhaps understand what happened > > Claude > > > > > > > ----- Original Message ----- > From: "Luis Angulo" <labalou2000@yahoo.com> > To: <Loopers-Delight@loopers-delight.com> > Sent: Sunday, December 04, 2005 1:05 PM > Subject: Re: Re EDP loosing MIDI Clock sync - Quest > > > Hi Kim, > Here is how i have the devices hooked up: > (this might not relate to auto record) > MPC1000 sampler midi out into FCB1010 midi in then its > midi out into EDP midi in.The FCB1010 controller shows > a blinking dot when receiving midi clock from the > MPC1000 i assume and the EDP was responding as well.I > was doing a lot of multiplying,inserting,replacing and > re-recording and it would stay synced for the most > part but after a while it would start drifting.I am > still wondering about this because i tried this at > home again and let a loop run for a long time and > didnīt notice any problems... > cheers > Luis > > > > --- Kim Flint <kflint@loopers-delight.com> wrote: > >> At 01:48 AM 12/2/2005, Luis Angulo wrote: >> >Yes,there is indeed a problem with it, i did a show >> on >> >Saturday where we improvised spontaneously music to >> >pictures and paintings which were being manipulated >> >with software.This is the first time i slave the >> EDP >> >to my MPC1000 and i had to constantly trigger the >> >reAlign function to keep the loops synced,i didnīt >> do >> >any loop copy or auto record,just simply recorded >> to >> >the running grooves of the MPC and it still >> >happened.As a master the EDP works flawlesly >> though. >> >> Luis, >> >> The problem we are talking about here only relates >> to using AutoRecord with >> sync=in, and has the easy fix of using LoopCopy=time >> instead of AutoRecord. >> If you were not using AutoRecord, then I don't think >> you were having the >> same issue Per is talking about. There isn't any >> known issue with normal >> use of sync in from midi clock - that should work >> fine. You would have to >> give a better explanation of your problem/setup for >> us to help you. >> >> kim