Re: Softstep's led behaviour

[Louie Angulo <louie.angulo@yahoo.com>]

Yes fabio i went through this  through skype with one of the support guys 
from Sofstep
Unfortunatley you have to do it through the advance sofstep editor,i was 
also having problems with the exp pedal not reacting properly to the values
But at the end i stucked to the normal editor, i didnt have the patience 
to reprogram every single preset with the advanced editor and the lights 
werent that important for what i wanted to do which was having the leds 
toggle for some functions and act momentary for some ESP style sus 
functions etc.,maybe someday when i have more time:-)
But is all doable yes!
Cheers
Luis


> On 30.03.2015, at 10:56, Fabio_A <eterogenus@gmail.com> wrote:
> 
> I got my softstep 2 and I'm quite happy with it  as a replacement for 
> the FCB1010.
> The new buttons are playable, very responsive  and I don't miss at all 
> that noisy click of  my previous footcontroller.
> 
> The red/green lights assignable on each pad are great for visual 
> feedback, so I don't need to look at the laptop to see what's going on.
> Neverthless, I'm still struggling to understand exactly how to get the 
> leds working as I'd like.
> or better, If ther's a way to have the lights "on" when I recall a set 
> of presets.
> 
> What i want to achieve is:
> 1. red led on - when I switch to a set of presets 
> 2. green led - when foot is on the pad
> 3. no led - when the foot is off the pad
> 
> I know it can be done, but how ?
> Do I have to send an external MIDI command to set the initial state of a 
> preset or that can be accomplished  with the Softstep advanced editor ? 
> (BTW: working in Hosted mode here).
> 
> Anyone's experience on this topic ?
> 
> -f
> 
>