Support
Looper's Delight
|
Support |
|
|
It occorrer to me and I solved it using a midi filter module in Bidule. Don't know if Live has something like that but I strongly raccomend to get under control your midi data streams. -f Il giorno 13/apr/2012, alle ore 19:32, Kevin Cheli-Colando <billowhead@gmail.com> ha scritto: > Well I have noticed that I get the occasional portamento cc sent after > the notes but I wasn't sure if that was the Rotary controller or the > FCB. > > I can't confirm things since I'm not in front of the computer I'm > using for this, but I believe I tried changing to PC messages instead > and I got no response at all from Mobius in Live. > > I am trying to be diligent in my testing before I send these messages > at least :-) > > Thanks for the ongoing help, I'm convinced this is going to open a > whole new vista of musical possibilities once I get this up and > running. > > Kevin > > On Fri, Apr 13, 2012 at 10:28 AM, Per Boysen <perboysen@gmail.com> wrote: >> A quick comment related Jeff's mentioning of the FCB sending out MIDI >> PC messages it is not programmed to send out. I have owned three FCB's >> and each of them sent out random bursts of MIDI CC# data now and then >> in addition to the MIDI Notes it was programmed to send out. Not >> thinking that this phenomenon can cause the issue Kevin suffers >> though, just wanted to complete the picture of The FCB's >> Peculiarities. >> >> Greetings from Sweden >> >> Per Boysen >> www.perboysen.com >> http://www.youtube.com/perboysen >> >> >> >> On Fri, Apr 13, 2012 at 6:21 PM, Jeff Larson >> <jeff.larson@sailpoint.com> wrote: >>> I ran a few tests on Windows and Mac, and I'm able to get Note On and >>> Note Off through Live to Mobius. >>> The tests were done with a little Korg nanoKey but that shouldn't make >>> a difference, the important thing is that you need to make sure that >>> the FCB 1010 is sending both Note On and Note Off and nothing else. >>> The FCB can sometimes send extra MIDI program changes along with the >>> note events if you don't disable that when you program the note. To >>> verify this use MIDI Monitor on Mac or MIDI-OX on Windows and make >>> sure that you're only getting Note on/off from the device. >>> >>> Next I brought up Live, 1 audio track, 1, midi track, went to "MIDI >>> Sync" tab in Live's preferences and made sure that for the nanoKey the >>> "On" button under the Track column was lit, the Sync and Remote >>> buttons should be Off. >>> >>> Then I dropped Mobius 2 into the audio track. In the Mobius MIDI >>> Devices window make sure there is nothing selected in the Plugin Input >>> Devices panel. In the MIDI track, the "MIDI From" button reads "All >>> Ins" and >>> "All Channels" under "Monitor" click the "In" button so it is lit, >>> under "MIDI To" select "1-Audio". >>> >>> Go back to the Mobius window and open the MIDI Control dialog. I >>> added a binding for the Record function and used MIDI capture to >>> detect the first key on the nanoKey. Close the MIDI Control dialog, >>> and press the key. Recording starts. Press key again, recording >>> stops. >>> >>> On Windows I was using Live 8.1.1 on OS X I was using an older trial >>> version of 7.0.12. >>> >>> Jeff >>> >>> >>> ________________________________________ >>> From: Kevin Cheli-Colando [billowhead@gmail.com] >>> Sent: Thursday, April 12, 2012 11:57 PM >>> To: Loopers-Delight@loopers-delight.com >>> Subject: Re: Mobius Mystery part 2 >>> >>> Well, this is getting embarrassing but I will press on to ask again >>> anyway. >>> >>> I can get the midi to work running Mobius as a stand alone. Record >>> starts recording and plays as expected when stopped. >>> >>> But when I go into Live, the recording always does that 1 second and >>> reset thing. I thought I tried all the things suggested (and I do >>> have it set up as described below) but I can't figure out what is >>> going on. Anyone want to take pity on a simpleton and walk me through >>> the steps of configuring Live and Mobius to play nicely together. I >>> feel like I'm missing something obvious but don't know how to track it >>> down. I guess its fair to say I know enough to cause trouble but >>> don't really quite understand exactly what I'm doing. >>> >>> I'd be happy to read a manual but I can't even seem to find the >>> solution to the problem I'm facing in the manual or forums (though >>> Jeff's manual does mention the long press reset problem but seems to >>> assume I would then know how to solve that issue). >>> >>> Round three anyone? >>> >>> Kevin >>> >>> >> > > > > -- > Till now you seriously considered yourself to be the body and to have a > form. That is the primal ignorance which is the root cause of all > trouble. > > - Ramana Maharshi (1879-1950) > > Sound and Vision: http://www.minds-eye.org > Video http://www.vimeo.com/user877640/videos >